Description
local manufactured
– Sweeper made to be towed with a tractor or a LDV/truck
– Brushes driven from rear wheel – NO engine
– Gearbox has a neutral position and 2 speeds at either 100 or 150 RPM, with a neutral universal coupling, heavy duty chains and sprockets
– Units include an operator’s platform guard, hood lifting bar and a hood chain guard
– Units are properly cleaned before spray-painted in a colour of your choice
– Easily attachable to a truck or tractor, with a three wheel chassis to give the shortest turning radius compared
– Top speed of prime mover should not exceed 8km/h when sweeping
– For road construction the sweeper is highly suited for cleaning the surfaces prior to black topping, leveling chips, lime or crushed rock
– Simple manual adjustments to angle brush 30 degrees to the left or right
– Hood/mud flap can be fitted in front of the broom hood to eliminate most of the stones being flicked onto the driver and towing vehicle
Technical Detail
Frame : Rigid all-welded heavy-duty steel construction
Rear axle: 50,8mm dia steel axle with self-aligned H/D pre-lubed bearings
Front axle: Stub axle on tapered roller bearings
Front tyres: 155 x 13 x 4 ply passenger
Rear tyres: 600 x 16 x 4 ply traction
Brush frame assy: 30° left or right angle
Brushes: 762mm diameter
304,8mm brush sections
1 set / 8 brushes – 11kg / brush
Sweeping path: 2133,6 mm at 30° left or right
Dimensions: Length (incl tow bar) 4928mm
Length (excl tow bar) 3404mm
Width 2600mm
Height 2150mm
Weight 997.9kg
ITEM B: (OPTIONAL)
Part no: 10360BUC – Loose manual clip-on hopper.
• Hopper can collect +/- 1m³, with a bottom debris discharge
ITEM C: (OPTIONAL)
Part no: 10360H/D – Broom segment (8 blocks = 1 set)
Brush live span:
• 280 hours on concrete or tar surface
• 400 hours on slushing or dirt roads
Size of brush:
• Diameter: 762mm
• Brush section: 300mm
• Centre square: 40 x 40mm
• Weight: 11kg
”
– Relatively cheaper than traction sweeper
– Works with hydraulics, so it will only work with a tractor that has hydraulic connections
TECHNICAL DETAIL
“This sweeper was designed with a 4 x 4 traction to handle all road surfaces. The sweeper was designed with an electric start, articulated in the middle via hydraulic cylinders. The brush drive comes from a hydraulic motor via a chain that is operated from a valve bank at the driver seat, also the hood can be moved from left to right via hydraulics from the driver seat. This new sweeper attachment design is able to fit a front-end loader as well as a forklift. The attachment to be hooked on and off via three pins.
TECHNICAL SPECIFICATIONS:
– Length 5420mm
– Width 1720mm
– Height 2380mm
– Skip capacity 0.48m³ (struck level)
– Weight 2200kg (unloaded)
– Drive model 4 x 4
– Payload 3000kg
– Wheelbase 1580mm
– Wheel thread 1470mm
– Ground clearance 248mm
– Minimum turning radius 8.45
– Drive to brush Hydraulic via chain
– Brushes 8 fitted on a 40mm square shaft
– Working condition 30º left or right angle
– Travelling speeds (max) Low 10km/h
– High 25km/h
– Sweeping width On 30º angle 2133.6mm
– No angle 2400mm”
– Drive to brush Hydraulic
– Travelling speed 6 – 14km/h
– Angle L or R 30 degrees
– Lift On tractor lifting arms
– Sweeping width 2133.6mm
– Shaft 40mm square
– Brushes:
– Brush quantity 8
– Material Wood / polypropylene
– Thickness of sections 3 x 2mm
– Diameter 762mm
– Brush sections 300mm
– Brush live span:
on concrete or tar surface 280 hours
on slushing or dirt roads 400 hours
“
